Argos 77

A new product from Belwooddoors is metal entrance doors. A sidelite / transome is available.
Outside
Inside
Color:
Морская волна
Solutions for this door

Advanced noise reduction

Excellent heat insulation

180° opening angle

Break-in protection

Coordinating inner caps

2 year warranty after installment

Technical characteristics

  • Hardware
    Handle rail / split handle Apecs H-0201, Mortise lock Apecs T-52-NIS, Cylinder, Latch lock lever Apecs Premier T-57/S8-NI, 3D-adjustable hinges with fixing into the end piece
  • Inside panels
    White
  • Dimensions
    2100mmх900mm, 2100mmх1000mm
  • Door frame
    1 mm
  • Filling
    Polystyrene foam
  • Outside panel
    Anthracit / Brown / Black
  • The perimeter of the door leaf
    1 mm

In detail about Argos 77

Argos 77 is an entrance door with increased frost protection:

- 76 mm thick metal frame reinforced with wooden beams;

- 3 seals;

- 2 thermo-breaks that allow the door not to freeze and remain warm on the inside;

- 77 mm thick leaf, made of zinc-plated steel and resistant to rust;

- 3-chamber glazing with structured foam frame (retains heat by 70% better than with aluminium frame).

- The door slab is insulated with high density polystyrene foam, which does not absorb moisture and will not settle over time. A special technological treatment ensures that the timber is resistant to various -climatic conditions, including temperature fluctuations.

Strength and durability give an additional advantage and guarantee by the fact that the structure is made not from a single piece, but from glued wood.

Optionally, it is possible to manufacture a sidelite in the style of Argos 77.

DOOR FITTINGS

The Argos 77 door features 2 locks and a corrosion resistant stainless steel handle on the internal side.

The brushed chrome door handle on the outside is ergonomic and underlines the original design. It blends spectacularly with the stainless steel frame and overlays.

It comes complete with 3D adjustable hinges (Germany).

AREA OF USAGE

The Argos 77 is designed for use as an external entrance door in the entrance hall. In this type of installation, a second door between the house and the vestibule is mandatory, which will remove warm air from the heated room and reduce the chance of condensation.

It is also acceptable to install Argos 77 as an entrance door from the street to a heated building without a vestibule. However, please note that in this situation there is an increased likelihood of condensation on the surface of the door when outside temperatures are low and relative humidity is high (over 40%) in the room behind the door.

Entry door configurations

RELIABILITY

A door leaf represents structure that is made of unibody sheet metal thickness 1 mm. The doors reliability provides by metal door frame thickness 1,5 mm. Inside the door, where locks are, the transversal and longitudinal ribs also from metal sheet are welded.

DURABILITY

Door leaf is filled in by the layer of polyurethane thickness 58 mm, which ensures stiffness of the door leaf, endurance, good sound insulation and heat transmission resistance. Unlike rock mineral wool, polyurethane filling doesn’t change its form. It doesn’t cause allergies. The lifetime of this material is around 40 year!

EASTHETICS

Outside MDF panel thickness 16 mm is covered by decorative finishing of German production. The inside panels have the same designs as interior doors from BELWOODDOORS collections.

COMFORT

Comfort and safety directly depends on the quality sealing form. The door frame has unibody curved 3-stepped form, with rubber seal guarantying high level of sound insulation. For metal door leaf is used the Swedish production seal.

SAFETY

From the hinges side, in the door end there are anti-removable pins don’t allow to open door slab even after cutting off the hinges. The lock covers for 4-th level security locks provide the highest protection level!

A VARIETY OF CHOICES

Diversity of inside panels with the same designs of interior doors from BELWOODDOORS collections.

Other models from a series Входные

We are always happy to meet our possible partners and invite you to cooperate on terms that will be equally beneficial not only to us, but to you. We can offer the most favorable variations on the implementation of interior doors in USA.

The main rule of our cooperation is the provision of the most acceptable and beneficial terms for both parties, not only at the start of the partnership, but also

during the entire period of our joint work.

We provide you with a special and truly exceptional product - interior doors from the manufacturer.

The firm "BELWOODDOORS" provides each of its partners with constant assistance in the foundation of their business and will be happy to give the dealers such conditions:

  • favorable pricing policy and accumulative bonuses;
  • exceptional initial working conditions;
  • advertising and information support;
  • very large, all-time supported size door storage;

All without exception door leafs, which are presented in the catalog of our company, are made of excellent raw materials. They are very reliable. The doors can be supplied with accessories that include the most resistant types of locks with the newest closing system.

The firm "BELWOODDOORS" occupies favorable positions in the wholesale trade of doors throughout the country. We are ready to work on favorable terms for you and offer the widest choice of interior doors.

We are the manufacturer, therefore the prices at us are accessible. Our staff will always help you in choosing our products.