Model 9

The Model 9 is an entrance door:
Outside
Inside
Color:
Морская волна
Solutions for this door

Advanced noise reduction

Excellent heat insulation

180° opening angle

Break-in protection

Coordinating inner caps

2 year warranty after installment

Technical characteristics

  • Outside panel
    2 types and colors of outside panel
  • The perimeter of the door leaf
    Made of zincked steel with polymer powder coating thickness 1 mm
  • Eccentric adjuster
    High level of sound insulation
  • Tamper resistance
    Anti-removable pins from hinges side
  • Filling
    Mineral wool
  • Compaction circuit
    2 sealing circuits (on the canvas and on the door frame) - for additional sound insulation
  • Door frame
    Reliability provides by metal door frame thickness 1,5 mm
  • Dimensions
    2100х900mm ; 2100х1000mm
  • Inside panels
    Same designs of interior doors from BELWOODDOORS collections
  • Hardware
    Welded hinge with roller bearing Fuaro T1/141-20, Handle Fuaro

In detail about Model 9

The Model 9 is an entrance door:

metal frame: frame profile width — 77 mm, metal thickness — 1 mm;

frame-welded construction;

2 seals;

slab thickness varies from 82 to 92 mm depending on the type of internal lining (milled MDF panel 6-16 mm);

the external panel material is MDF;

the exterior finish is PVC (polyvinylchloride) or wear-resistant enamel.

We use mineral wool, which has low thermal conductivity values, as an internal filler. Its additional advantage is fire safety: the material does not ignite even at 450 °C.

The strength and reliability of the fabric are responsible for ribs filled with thermal insulation. In addition, these, together with the anti-release pins on the hinge side and the two three-bar locks, reinforce the burglary resistance.

This door has a peephole and an additional “night” lock.

Hardware

The hardware kit includes:

split handle;

2 locks (security class 4);

hinges with a bearing provide a firm hold, facilitate the opening/closing process and prevent the slab from sagging.

Finishing

Exterior and interior colours: custom enamel (RAL catalogue).

Entry door configurations

RELIABILITY

A door leaf represents structure that is made of unibody sheet metal thickness 1 mm. The doors reliability provides by metal door frame thickness 1,5 mm. Inside the door, where locks are, the transversal and longitudinal ribs also from metal sheet are welded.

DURABILITY

Door leaf is filled in by the layer of polyurethane thickness 58 mm, which ensures stiffness of the door leaf, endurance, good sound insulation and heat transmission resistance. Unlike rock mineral wool, polyurethane filling doesn’t change its form. It doesn’t cause allergies. The lifetime of this material is around 40 year!

EASTHETICS

Outside MDF panel thickness 16 mm is covered by decorative finishing of German production. The inside panels have the same designs as interior doors from BELWOODDOORS collections.

COMFORT

Comfort and safety directly depends on the quality sealing form. The door frame has unibody curved 3-stepped form, with rubber seal guarantying high level of sound insulation. For metal door leaf is used the Swedish production seal.

SAFETY

From the hinges side, in the door end there are anti-removable pins don’t allow to open door slab even after cutting off the hinges. The lock covers for 4-th level security locks provide the highest protection level!

A VARIETY OF CHOICES

Diversity of inside panels with the same designs of interior doors from BELWOODDOORS collections.

Other models from a series Входные

We are always happy to meet our possible partners and invite you to cooperate on terms that will be equally beneficial not only to us, but to you. We can offer the most favorable variations on the implementation of interior doors in USA.

The main rule of our cooperation is the provision of the most acceptable and beneficial terms for both parties, not only at the start of the partnership, but also

during the entire period of our joint work.

We provide you with a special and truly exceptional product - interior doors from the manufacturer.

The firm "BELWOODDOORS" provides each of its partners with constant assistance in the foundation of their business and will be happy to give the dealers such conditions:

  • favorable pricing policy and accumulative bonuses;
  • exceptional initial working conditions;
  • advertising and information support;
  • very large, all-time supported size door storage;

All without exception door leafs, which are presented in the catalog of our company, are made of excellent raw materials. They are very reliable. The doors can be supplied with accessories that include the most resistant types of locks with the newest closing system.

The firm "BELWOODDOORS" occupies favorable positions in the wholesale trade of doors throughout the country. We are ready to work on favorable terms for you and offer the widest choice of interior doors.

We are the manufacturer, therefore the prices at us are accessible. Our staff will always help you in choosing our products.